Configuring a Wireless Network

The wireless network allows users to configure both employee and guest networks.

Employee Network

An Employee network is a classic Wi-Fi network. This network type is used by the employees in an organization and it supports passphrase-based (PSK) or 802.1X-based authentication methods. Employees may access the protected data through the employee network after successful authentication. The employee network is selected by default during a network profile configuration.

The first employee network that you create for the site cannot be deleted unless you choose to delete the site entirely from your account.

To configure an employee network:

  1. Click the Networks tile on the Instant On web application home page, or click Networks from the navigation pane on the left.
  2. Under Networks > Overview, click Create Network.
  3. Under Network Identification, configure the following:
    1. Name—Enter a name for the employee network. This will also be broadcast as the SSID for the WLAN network.
    2. Network Type—Select the Wireless option. The wireless option appears only when your site has both wired and wireless networks.
    3. Click Next.
  4. Under Network Properties > Network Usage, select Employee, to indicate that the network is for an enterprise.
  5. Under Network Password (PSK), enter a password of your choice in the Network password text box. This enables you to secure the network using a shared password (PSK).

    The Network password settings will be grayed out when only the 6 GHz radio spectrum is selected for the wireless network. For more information, see Radio.

  6. Under Security, select one of the following Network Security options:
    1. WPA2 Personal—Uses PSK password authentication. WPA2 Personal is enabled by default.
    2. WPA2 + WPA3 Personal—Uses PSK password authentication. Select WPA2 + WPA3 Personal to enable this option.
    3. WPA2 Enterprise—Uses Radius authentication. Select the WPA2 Enterprise radio button to select this option.
    4. WPA2 + WPA3 Enterprise—Uses Radius authentication. Select the WPA2 + WPA3 Enterprise radio button to select this option.
  7. On selecting WPA2 Personal or WPA2 + WPA3 Personal Network options, displays the Network Password (PSK) section. Under Network Password (PSK) > Password, you must set a password.
  8. On selecting WPA2 Enterprise or WPA2 + WPA3 Enterprise options, displays the Authentication section. Under Authentication > RADIUS Profile drop-down list you must select either an existing RADIUS profile or create a new RADIUS profile.

    For more information on creating a radius profile, see Creating a RADIUS Profile.

  9. On assigning a RADIUS profile, View RADIUS Profile is displayed.
  10. Click View RADIUS Profile, opens the RADIUS profile details panel on the left.

  11. Click Next.
  12. Under IP Assignment, select either Specific to This Network (default) or Same as a Local Network.
    • For Same as a Local Network (default), select a network from the Wired Network drop-down list.
    • For Specific to This Network enter the Base IP Address and select a subnet mask from the Subnet Mask drop-down list.
  13. Click Create Network, to finish creating the Employee Network.

Guest Network

A Guest network is configured to provide access to non-enterprise users who require access to the Internet.

To create a Guest Network, follow these steps:

  1. Click the Networks tile on the Instant On web application home page, or click Networks from the navigation pane on the left.
  2. Under Networks > Overview, click Create Network.
  3. Under Network Identification, configure the following:
    1. Name—Enter a name for the guest network. This will also be broadcast as the SSID for the WLAN network.
    2. Network Type—Select the Wireless option. The wireless option appears only when your site has both wired and wireless networks.
    3. Click Next.
  4. Under Network Properties > Network Usage, select Guest, to indicate that the network is for guest users.
  5. Under Security > Network Security, select one of the following security levels:
    • None—if you want the user to access this network without the requirement of entering a username or password.
    • Wi-Fi Enhanced Open—Wi-Fi Enhanced Open (OWE) is the open security type derived from WPA3. It runs concurrently with an equivalent legacy Open SSID. For more information, see Configuring a Wireless Network .
    • WPA2 Personal—This option allows you to secure the network using a shared password (PSK) encryption. Enter a password of your choice in the Network password field.
    • WPA2 + WPA3 Personal—This is the default setting when creating a new guest network. This option allows you to secure the network using a shared password (PSK) encryption. Enter a password of your choice in the Network password field.

    The Network password settings will be grayed out when only the 6 GHz radio spectrum is selected for the wireless network. For more information, see Radio.

  6. To configure a guest portal in addition to the security levels, click the Guest portal checkbox under Network Options.
  7. Click Next.
  8. Under IP Assignment, select either Specific to This Network (default) or Same as a Local Network.
    • For Specific to This Network (default) enter the Base IP Address and select a subnet mask from the Subnet Mask drop-down list.
    • For Same as a Local Network, select a network from the Wired Network drop-down list.
  9. Click Create Network, to finish creating the Guest Network.