Network Assignment
The Network Assignment page allows you to configure the radio settings for the wireless network and also to allow or deny a wireless network on a specific device (access point only).
Radio
Radio settings in the Instant On web application allows you to configure radio frequencies for your wireless network.
To configure the radio frequency, follow these steps:
- Click the tile on the Instant On web application home page, or click Networks from the navigation pane on the left.
- In the Networks > Overview screen, select one of the following methods to view the network details:
- Clicking on the network name.
- Hover the cursor over the network, click the
button, and select View Details from the drop-down list.
- Click the Network Assignment tab.
- Under , select the radio frequency. The available frequencies are:
- —The AP will broadcast the wireless network only on the 2.4 GHz radio frequency.
- —The AP will broadcast the wireless network only on the 5 GHz radio frequency.
- 6 GHz—The AP will broadcast the wireless network only on the 6 GHz radio frequency.
WPA3 or OWE (Enhanced Open for Guest Networks) security is required for the wireless network to operate in the 6 GHz radio frequency.
Instant On allows you to enable or disable 802.11b rates from the network by using checkbox. By default, 802.11b rates are disabled for all the networks. To enable this option, select the checkbox. This allows 2.4 GHz clients that are far away to connect to the network by enabling lower data rates.
Enabling this option might slow down the network performance.
Access Point
This section displays the list of access points that are deployed at the site.
Under Access Point > Devices, select the checkboxes next to all the access points that can broadcast the network and allow client connections to the wireless network.