Adding a Device

Instant On allows you to add up to 125 devices to a site. To add a device to the Devices list, follow these steps:

  1. Click the Devices () tile on the Instant On web application home page or click Devices from the navigation pane on the left. The Device Overview page is displayed.
  2. Click Add devices.
  3. Place your Instant On device in its destination area and make sure it is powered on and connected to the Internet. Click the Include outdoor over-the-air devices checkbox, to include outdoor devices (AP17 and AP27) that are connected as mesh.
  4. Select Next. It usually takes around 4-5 minutes for the Instant On devices to be detected.
  5. Review the device(s) discovered and click Add Devices to add them to your site.

    Any unsupported device found during device discovery cannot be added to the device inventory. An error message stating This device model is not supported will be displayed.

If you still cannot find your device, click the I don't see my device button to view the troubleshooting options.

To extend your network with a gateway, see Extending Your Network - Gateway

Types of Devices

Instant On supports four types of devices: