HPE Networking Instant On Help Center
Threat Management
The Threat Management page allows you to enable or disable the threat detection and prevention. This setting is enabled by default. Threats with a critical severity level are reported in the Threats table and blocked. The threats with other severity levels are reported in the Threats table but are not blocked.
To enable or disable the threat management function, follow these steps:
- Tap the (
)tile on the Instant On mobile app home page. - In the Threats screen, tap the advanced menu (
) icon and tap Threat Management. - Under Threat Management, select one of the following options:
- Threat Detection and Prevention (default)—Activates the threat management function. This option is enabled by default. When enabled, all incoming and outgoing traffic routed by gateway is inspected by Intrusion Detection and Prevention System (IDPS).
- No Threat Management—Disables threat detection. When this option is selected, the Threats and Threat Exceptions pages will not be displayed.
