WAN Redundancy
WAN Redundancy provides an intelligent, automated way to ensure continuous network availability. It uses multiple WAN connections and offers seamless failover to maintain uninterrupted business operations.
The WAN Redundancy page is displayed only when a secondary WAN connection is configured.
To configure WAN redundancy, follow these steps:
- Active / Backup Failover (default)—Prioritizes the primary WAN connection for all traffic. The secondary WAN connection is used only if the primary connection fails.
- Active / Active Load Balancing— Distributes network sessions between the primary and secondary WAN connections.
Active / Standby Failover
WAN Failover ensures continuous internet connectivity by automatically switching to the secondary WAN connection if the primary connection fails. The secure gateway monitors the status of both the primary and secondary WAN connections. If the primary WAN goes offline, the failover is triggered, and the secondary WAN (standby) takes over. The switch from primary to secondary occurs within two minutes. Once the primary WAN is back online, it takes around three minutes to switch back to the primary connection.
Active / Active Load Balancing
Load balancing distributes network sessions between the primary and secondary WAN connections. By default, the sessions are shared evenly (50% for each WAN connection).
Weight Ratio
The Weight Ratio slider changes how sessions are distributed across the WAN connections instead of sharing them evenly.
The weight ratio is useful when the WAN connections have different capacities — for example, when one connection is faster than the other, or when the internet providers apply different bandwidth limits — so that more sessions are directed to the preferred connection.
To set the weight ratio:
- On the WAN Redundancy page, select Active / Active Load Balancing.
- On the Weight Ratio slider, drag the handle until each WAN connection is set to the required percentage. Each WAN connection appears as a named, color-coded segment with its percentage.
-
Click Update to save the changes.
The slider moves in 5% steps, and the percentages always add up to 100%.
The weight ratio balances the number of sessions directed to each WAN connection, not the exact bandwidth. Actual data usage depends on the traffic carried by each session and evens out over time; a single high-traffic session can still fill a WAN connection.
The configured weights are kept when switching between failover and load balancing. Adding a WAN connection resets the split to even; removing one assigns its share to the primary WAN connection.
WAN Failover
WAN Failover ensures continuous internet connectivity by automatically switching to the secondary WAN connection if the primary connection fails. The secure gateway monitors the status of both the primary and secondary WAN connections. If the primary WAN goes offline, the failover is triggered, and the secondary WAN (backup) takes over. The switch from primary to secondary occurs within two minutes. Once the primary WAN is back online, it takes around three minutes to switch back to the primary connection.