HPE Networking Instant On Help Center
Creating a Secondary WAN
You can create a secondary WAN connection after the site creation. The secondary WAN connection is always assigned with the secondary priority.
To create the secondary WAN, follow these steps:
- Click the tile on the Instant On home page, or navigate to the > WAN page from the navigation pane on the left.
- Click Create Network.
- Under Identify the Network, configure the following:
- Name—Enter a name for the WAN connection.
- Priority—By default, the priority value is set to Secondary.
- Click Next.
- Under Set Connectivity, configure one of the following IP Address Assignment options:
- Automatic(default) — Select this option to automatically assign the IP address through the DHCP server.
- Static — Select this option to manually assign a static IP address for the WAN connection. Configure the following parameters:
- —Enter a Static IP address.
- —Enter the subnet mask.
- —Enter the IP address of the Default Gateway.
- —Enter the IP address of the primary DNS server.
- Secondary DNS Server—Enter the IP address of the secondary DNS server.
- PPPoE— Establishes the WAN connection to use Point-to-Point Protocol over Ethernet (PPPoE) for IP assignment.
- Under PPPoE Service, configure the following parameters:
- Username—Enter the user name provided by your ISP.
- Password—Enter the password provided by your ISP.
- Service Name—Enter the name of your ISP.
- MTU—Enter the MTU in bytes for the PPoE connection. The default MTU value is 1492 bytes.
- Configure one of the following DNS Server Assignment options:
- Automatic(default) — Select this option to automatically assign the IP address through the DHCP server.
- Static — Select this option to manually assign a static IP address for the WAN connection. Configure the following parameters:
- —Enter the IP address of the primary DNS server.
- Secondary DNS Server—Enter the IP address of the secondary DNS server.
- Under PPPoE Service, configure the following parameters:
- Uplink VLAN—Assign an Uplink VLAN for network routing. The value must be between 1 and 4092.
- Click Next.
- Under Assign Network, select an available port to assign the WAN connection and select whether the port is tagged or untagged.
- Port 3 on SG1004 gateway
- Port 4 or Port 3 on SG2505P gateway. Port 4 is a 2.5G Ethernet port and Port 3 is a 1G Ethernet port.
- Click Create Network. The secondary WAN is created and displayed in the WAN table.